Mohala o mong le o mong oa moea o sebetsa ka mokhoa o ikhethileng o ipapisitse le litšoaneleho tsa ona tse ikhethileng tse tsoaletsoeng ho fihlela sepheo sa eona sa pele sa ts'ebeliso e itseng ea boenjiniere. Re rala le ho etsa lisebelisoa tse fapaneng tsa boleng bo holimo tse hulang / ho hula / ho phahamisa moea bakeng sa lits'ebetso tse fapaneng tsa boenjiniere.
Letoto lena la windlass le na le sistimi e makatsang ea braking, e e fang matla a ho sebetsana le maemo a fapaneng a feteletseng a ho sebetsa. E ka fumana taolo ea lebelo tse peli haeba e kopantsoe le hydraulic motor, e nang le phallo e fapaneng le lebelo le habeli. Ha e kopantsoe le hydraulic axial piston motor, khatello ea ho sebetsa le matla a ho khanna a winch a ka ntlafatsoa haholo.
Tokiso ea mochini:Senaho hula moyae na le lebokose la li-gearbox, enjene ea hydraulic, brake ea mofuta o metsi, li-valve tse fapaneng, moqomo, foreimi le clutch ea hydraulic. Liphetoho tse etselitsoeng molemong oa hau lia fumaneha neng kapa neng.
The Pulling Windlass Main Parameters:
| WincheMohlala | IYJ2.5-5-75-8-L-ZPH2 | Nomoro ea Mekhahlelo ea Lithapo | 3 |
| Hula ka Lera la Pele(KN) | 5 | Bokhoni ba Drum(m) | 147 |
| Lebelo ho Lera ea Pele(m/min) | 0-30 | Mohlala oa makoloi | INM05-90D51 |
| Kakaretso ea Phalliso(mL/r) | 430 | Mohlala oa Gearbox | C2.5A(i=5) |
| Working Pressure Diff.(MPa) | 13 | Brake Opening Pressure(MPa) | 3 |
| Phepelo ea Phallo ea Oli(L/min) | 0-19 | Khatello ea ho Bula ea Clutch(MPa) | 3 |
| Ropo Diameter(mm) | 8 | Min. Boima ba Hoetla mahala(kg) | 25 |
