Winch ea haeteroliki- IYJ355-50-2000-35DP e hahiloe hantle ho latela theknoloji ea rona e nang le patente. Mokhoa oa winch o entsoe ka hloko ho phethahatsa thomo ea oona e lebelletsoeng. Matla a thepa le sebopeho sa eona a baloa ka botlalo. Mokhoa oa ho hlophisa cable e ikamahanyang le maikutlo a angle o kopantsoe ka tlhaho ho haha 'mele oa winch, e leng se ananeloang haholo ka lebaka la ts'ebetso ea eona e sebetsang hantle le e tšepahalang. E na le bokhoni bo phahameng, lerata le tlase, matla a phahameng, paballo ea matla, sebopeho se kopaneng le bokhoni ba litšenyehelo. Winch li sebelisoa haholo homechini ea kaho, mechini ea peterole, mechini ea merafo,mechini ea ho cheka, mechine ea likepe le ea mokatong.
Tlhophiso ea Mekaniki:Winch e na leli-valve tsa li-block, enjene ea haeteroliki, Brake ea mofuta oa Z, lebokose la gear la polanete la mofuta oa KC kapa mofuta oa GC, moropa, foreimi, brake, boto ea tšireletso le mokhoa oa terata o hlophisitsoeng ka boiketsetso. Liphetoho tse ikhethileng bakeng sa lithahasello tsa hau li fumaneha neng kapa neng.
TheWinch ea haeterolikiLiparamente tse ka Sehloohong:
| Lera la bone | Lebelo le tlase | Lebelo le phahameng |
| E lekantsoe ho Hula (KN) | 50 (terata ea Ø35) | 32 (terata ea Ø35) |
| Lebelo la Terata le Lekantsoeng (m/s) | 1.5 (terata ea Ø35) | 2.3 (terata ea Ø35) |
| Lebelo la Moropa le Lekantsoeng (rpm) | 19 | 29 |
| Lera | 8 | |
| Boholo ba Moropa:radius e ka tlase x Boto ea Tšireletso x Bophara (mm) | Ø1260 x Ø1960 x 1872 | |
| Bolelele ba terata (m) | Ø18 x 2000, Ø28 x 350, Ø35 x 2000, Ø45 x 160 | |
| Bophara ba terata (mm) | 18, 28, 35, 45 | |
| Mofuta oa Sefokotsi (ka enjene le brake) | IGT80T3-B76.7-IM171.6/111 | |
| Motlakase oa Hydraulic bakeng sa Sesebelisoa sa Tharollo ea Lithapo | INM05-90D31 | |
| Sesebediswa sa Tokisetso ya Terata | Tokisetso ea terata e ikamahanyang le maemo ea Angle Self-feedback | |
| Clutch | Hase | |
| Phapang ea Khatello ea Mosebetsi (MPa) | 24 | |
| Phallo ea Oli (L/min) | 278 | |
| Karolelano ea Phetiso ea Toal | 76.7 | |